The Jarvis Model 425-20 -hydraulically powered hock cutter for sheep.
The 425-20 is best suited for sheep hock cutting before fleece removal. It is also suitable for beef tail removal and hog hock cutting. Specially designed grabber mechanism holds onto hock to prevent dropping until a trigger is released. Compact for easy maneuverability; robust for long, trouble-free operation. Super fast cutting cycle combined with high cutting force means high performance for the most demanding applications. Designed for optimum operator comfort. Anti-tie down controls for operator safety. Constructed from corrosion resistant materials for optimum hygiene. Meets national and international requirements for hygiene and safety.


Technical Specifications
Drive | Hydraulic |
---|---|
Cycle Cutting Time | 1.0sec |
Cutting Force | 2000lbf / 8.90kN |
Control Handle - Air/Dual Anti-tie Down Bar | 50psi / 3.4bar |
Blade Opening | 3.7in / 94mm |
Overall Length | 21in / 533mm |
Weight | 25lbs / 11.3kg |
Hydraulic Power Unit | |
Motor Power | 5.0hp / 3729W |
Operating Voltage | 460 / 230 V, 3 phase, 60 Hz (other voltages and frequencies available) |
Hose Length | 16ft / 4.9m |
Oil Capacity | 20 gallons / 76L |
Oil Viscosity at 10000 F / 400 C | 200 SUS / 46 ISO |
Overall Dimensions with heat exchanger (L x W x H) | 34 x 24 x 28in / 864 x 610 x 711mm |
Overall Dimensions without heat exchanger (L x W x H) | 31.5 x 25.4 x 29.9in / 800 x 645 x 760mm |
Weight (without oil) | 250lb / 113 kg |